Embedded Files
RedBeam Mobile Device Configuration and App Installation Guide
*** If your device is on the "HI There" screen, scan the Bypass barcode below. This will skip you to the home screen; allowing you to begin staging quickly ***
1. Make sure that your mobile device is powered on and has internet connectivity.
2. On your mobile device, open your list of applications by swiping up from the bottom of
the screen.
3. Scroll down to the bottom of the list of applications and select the “StageNow”
application.
4. Exit the StageNow Application.
5. Open the "DataWedge" Application.
6. Select "Profile0".
7. Scroll down until you see the section named "Keystroke Output".
8. Select the "Basic Data Formatting" option.
9. Check the "Send ENTER key" box.
5. Once “StageNow” has finished the staging process, you will see the following message, indicating that the staging was successful.
6. Press the Home button on your mobile device.
7. From the Home screen, open your Google Chrome browser.
8. From Chrome, navigate to https://app.redbeam.com
9. Once you are at the login screen, you should see a banner at the bottom of the screen, asking if you want to add the “RedBeam” application to your home screen.
RedBeam Site
10. Select the banner.
a. If you do not see the banner, select the 3 ellipses option in the top right corner of your Chrome browser.
b. Select the “Install app” option.
11. You will be prompted to either "Cancel" or "Install" the RedBeam application. Select the "Install" option.
12. Once the application has been installed, go back to your home screen. You should see the “RedBeam” application installed.
13. Now that you have installed the “RedBeam” application, you can select the application and login.
Page updated
Report abuse