Office Depot - ZQ63 Staging

**Process use files found on shared drive at Technical Services\Customer Files\Office Depot\SOP\Printers**

ZQ63 - Staging Process

Proceed to the "Device Staging" section

Device Staging

Install Wireless Network Card

1. Open the module access door in the bottom of the printer

2. Insert the wireless network card 

3. Reattach the module access door

Load Approved Zebra MQTT Config and Network Config Files

For Site 1167 - Romeoville:

4. Connect the printer to a laptop via USB

5. Connect power and turn on the printer

6. Open Zebra Setup Utilities and select the appropriate printer

7. Select Open Printer Tools >> Action >> Send file

8. Download files here 

9. For ZQ630 printers, send ZQ630_SSTConnect.cpcl to first connect to SST network

10. Send Zebra_MQTT_config.ZPL to the printer and wait for it to restart

11. Login to SOTI Connect - https://scp001327.soticonnect.cloud/Connect/#/login

    1. Username - sst-staging

    2. Password - Officedepot1234

12. Select top left hamburger menu >> New Devices

13. Under Waiting for Approval, find the Discovered On date that matches the date\time you applied the zpl files. The IP address will be something like 192.168.10.xx

14. Check that printer and select approve

15. Select top left hamburger menu >> Devices

16. Find the printer that was just approved and move it to the correct SITE group

Load Approved Zebra MQTT Config and Network Config Files

For Sites Long Beach, 1135-Freemont, 1078-Kent, 1080-Denver, 1214-Buford, 1079-Grand Prairie      

17. Connect the printer to a laptop via USB

18. Connect power and turn on the printer

19. Open Zebra Setup Utilities and select the appropriate printer

20. Select Open Printer Tools >> Action >> Send file

21. Download files here 

22. For ZQ630 printers, send ZQ630_SSTConnect.cpcl to first connect to SST network

23. Send Zebra_MQTT_config.ZPL to the printer and wait for it to restart

24. For ZQ630 printers, send ZQ630_WIFI_SC_BSD.cpcl to the printer and wait for it to restart

25. Login to SOTI Connect - https://scp001327.soticonnect.cloud/Connect/#/login

    1. Username - sst-staging

    2. Password - Officedepot1234

26. Select top left hamburger menu >> New Devices

27. Under Waiting for Approval, find the Discovered On date that matches the date\time you applied the zpl files. The IP address will be something like 192.168.10.xx

28. Check that printer and select approve

29. Select top left hamburger menu >> Devices

30. Find the printer that was just approved and move it to the correct SITE group

QA

Follow the steps per device QA

1. Login into Office Depot SOTI Connect and select SITE group 

2. Select printer and seach for ssid to ensure that displays as "SCaas_TT"