Office Depot Supply Chain - RS5100 REX Staging

RS5100 - REX Staging Process

*** This guide is the same as the REX pending staging process. If the device obtained was from the spare pool, no other staging will be needed. STILL CHECK THE DEVICE to confirm that it can power on, buttons are functional, the strap is adjustable and the device can scan a barcode. If the criteria is met, skip staging and move on to fulfilling the RMA  ***  

1. Grab a RS5100 and a battery.

2. Insert the battery into the device and press the yellow button on the left of the device.

   • Wait for a few seconds. A few beeps will sound off with a green light indicating that the device is powering on.

3. Test the RS5100s finger strap to make sure that it can be adjusted and is secure.

4. Test the RS5100s scanner and scanner button.

   • The scanner button should have a slight click sound when pressed.

   • The scanner (when the button is pressed and held down) should look like a red cross.

5. Scan a barcode with the RS5100.  

   • Three beeps will sound off (this means that the device was able to scan the barcode). 

Staging is complete. Proceed to the Supply Chain RMA Fulfillment Process