Office Depot Supply Chain - RS507 REX Prep

RS507 - REX Pending Staging Process

*** This device is generally located in the either the bin named "Back-from-Repair" or "Awaiting Evaluation". ***

1. Grab a RS507 and a battery.

2. Insert the battery into the device.

   • Wait for a few seconds. A few beeps will sound off with a few red lights indicating that the device is powering on (yellowish-green lights may flash intermittently after the red lights come on; this is fine)

3. Test the RS507s finger strap to make sure that it can be adjusted and is secure.

4. Test the RS507s scanner and scanner button.

   • The scanner button should have a slight click sound when pressed.

   • The scanner (when the button is pressed and held down) should look like a red cross.

5. Scan a barcode with the RS507.  

   • Three beeps will sound off (this means that the device was able to scan the barcode). 

6. Open REX Assets and search the Serial Number of the device

7. Change the status of the device from “Awaiting Evaluation” or "IN REPAIR- SUPPLY CHAIN" to “SPARE POOL- SUPPLY CHAIN”

8. Change the location ID of the device from "ZEBRA-SC" to “SST-SC”

   • If the location ID is anything other than "SST-SC", change it to "SST-SC"

9. Place the newly updated and staged device in the appropriate spare pool bin with the rest of its like models (Spare Pool Supply Chain RS507)

Staging is complete.