Sky Lease Cargo - TC57

Revision History

5/31/2023 - Initial Draft - Approved OS - Android 11 BSP 11.35.05 U00

6/5/2023 - Added Staging step to confirm build number

Sky Lease Cargo Staging requires Zero Touch registration

All devices receive the default configuration: TC57 - skylease

Log into Zero Touch using the following login information below:
- User name: zt.admin@sstid.com
- Password: mdm4life
Select Devices on the left side
Select + Add device on top right corner
Enter customer name and select: Sky Lease Cargo | 1098599614
Select Cellular
Copy and paste imei(s) to register (separate each serial with a new line, space, colon, or comma) into the IMEI numbers* box
Select Add > # device added will appear > select Done
You can now begin OS load and staging the device.

Unbox device
Lift the access door.
Slide the microSD card holder to the unlock position.
Lift the microSD card holder.
Insert the microSD card into the card holder door ensuring that the card slides into the holding tabs on each side of the door.
Close the microSD card holder and lock into position.
Re-install the access door.
Insert the battery, bottom first, into the battery compartment in the back of the device.
Press the battery down until it snaps into place.

13. At this point OS Load can begin and staging can be processed.

15. After completion, remove the access door, remove micro SDcard, and replace access door.

Press and hold both power & PTT key
Release the keys after Zebra logo appears
Android Recovery menu will boot up
Load base level OS package HE_FULL_UPDATE_11-35-05.00-RG-U00-STD-HEL-04.zip
1. - Volume key down to move highlight
  - Select with Power Key Apply upgrade from SD card > press power key
  - Select HE_FULL_UPDATE_11-35-05.00-RG-U00-STD-HEL-04.zip > press power key
After Install Complete > Select Reboot system now > press power key

On Hi There screen > Select Start
On Connect to mobile network > Select Skip
Connect to WiFi > tap SST Guest Access
Getting your phone ready... This may take a few minutes will appear
This device belongs to your organization > Select Next
Getting ready for work setup... will appear
MobiControl Enrolling... will appear
Let’s set up your work device > Select Accept & Continue
Keep your work at your fingertips... will appear
This device isn’t private > Select Next
MobiControl Enrollment will be in progress... will appear
Google Services > Scroll down and select Accept
Your device is ready to go! > Select Done
The home screen will appear and SOTI MobiControl A+ Service will install
SOTI Lockdown will appear with vmail and settings apps
Once the device has a lockdown and apps > press and hold back button > Select Administrator > scan password barcode: velocity
Select Profiles > Confirm Installed status
- tc57 image = Installed
- tc57 Lockdown = Installed
Press Home (circle icon)
Swipe up to view apps > Select Settings app
Select About Phone > Scroll to bottom and confirm Build number = 11-35-05.00-RG-U00-STD-HEL-04
Select Home (circle icon)
Swipe up to view apps > Select MobiControl
Press and hold the back button > Select User Mode
Tap each app to confirm opens
Power down unit
After completion, remove the access door, remove micro SDcard, and replace access door.

Page updated

Report abuse