Del Monte - ET40 Staging

What to Expect

This process enables automated, large-scale deployment of corporate devices. This SOP covers the two main steps: device enrollment by the reseller and configuration assignment by the customer. This is a remote staging process, and physical devices are not expected to be shipped to our location for configuration. Following these steps ensures a consistent, secure, and efficient deployment.

Device Enrollment (Reseller Portal)

Objective: To add a new Zebra ET40 device to the customer's Zero-Touch account using the reseller portal. This process "claims" the device for the designated customer.

1. Log in to the Reseller Portal:

   • • Email: zt.admin@sstid.com

     • Password: Mdm4Life@@

2. Navigate to Device Upload:

   • • Once logged in, locate and select the "Devices" tab from the left-hand navigation panel.

     • Click the "+" (Add) button to begin the process of adding a new device.

3. Enter Device and Customer Information:

   • • A dialog box will appear. You will be prompted to provide the following information:

       1. • Customer ID: Enter Fresh Del Monte Produce or use Customer ID: 1234819420

          • Device Identifier: Select "Serial Number" and enter the serial number of the Zebra ET40.

          • Manufacturer: Select "zebra technologies"

          • Model: et40

4. Add the Device:

   • • Double-check that the serial number and Customer ID are correct.

     • Click the "Add" button to submit the information.

5. Verify Enrollment:

   • • Confirm that the device is listed with the correct Customer ID.

Proceed to the "Configuration Assignment (Customer Portal)" section

Configuration Assignment (Customer Portal)

Objective: To assign a pre-defined EMM configuration to the newly enrolled Zebra ET40, ensuring it auto-provisions upon its first boot-up.

1. Log in to the Customer Portal:

   • • Email: zt.admin@sstid.com

     • Password: Mdm4Life@@

2. Locate the Device:

   • • Using the search bar on the upper lefthand corner, search and select Fresh Del Monte Produce

     • Click on the "Devices" tab in the navigation panel.

     • Use the search bar at the top of the page to find the Zebra ET40 by its serial number. You should see the device you added from the reseller portal.

3. Assign a Configuration:

   • • Select the "Edit" button to the right of the newly enrolled ET40 device from the list.

     • In the "Configuration" dropdown menu that appears, select the QC Tablets configuration (ID 988920886).

4. Apply the Configuration:

   • • Click the "Save" button to save the assignment.

     • The "Configuration" column for the device will now display the name of the EMM profile you selected.

Staging is Complete